Using a testing kit will tell you what your pool levels are and it will show you what the ideal levels should be at in the pool. The pools problem with algae and cloudy water can be caused by bad pool levels. If you notice that the water is forming algae quicker than normal or the water is starting to cloud, you must check the PH level and the chlorine level. You must determine if low water levels or dirty water is causing the pools problems. Then you will have to adjust the waters PH and chlorine before anyone is allowed to swim.
Chlorine Levels
The chlorine levels should be kept in a range between 1.5 and 3.0 PPM. This is important if people are going to be swimming in the pool. If the levels are high, it will be unsafe for swimming. If the levels are low, it can allow bacteria to grow in the water. The chlorine level should be checked when the pool levels are tested weekly. If you would have to adjust the pH level, afterwords, you would have to recheck the chlorine level to make sure you do not have to raise or lower it. The pH levels can affect the chlorine levels.
Low Water Levels Cause Pools Problems
Pool levels are not the only thing that affects the water conditions. If you do not keep the water levels where they should be, the pool filters and skimmers will not work correctly. This allows dirt and debris to stay in the pool and play havoc on the pools chemical levels. You must maintain the proper water levels as well as the chemical levels to keep a pool safe. If the pool is open to swimmers, you must keep the water levels and chemical levels correct.
Dirty Water and Pool Levels
Allowing the pool levels to deteriorate can cause algae growth, debris to clutter the water and makes the water unsafe. Dirty and cloudy water is unsafe for many reasons. You cannot swim in it safely because the chemical levels may be wrong and the dirty water can cause health issues if ingested. It is very important that the pools problems are corrected before anyone is allowed to swim. You must clean the debris from the water, keep the water level where it belongs and test the water for proper chemical levels.
Use a testing kit at least once a week or twice a week when the swimming season is high to make sure that the pool levels are maintained. Make sure to add chemicals when needed and keep the pool water healthy for swimming. Never allow pools to become filled with debris or low chemical levels. Pools are easy to keep clean and safe if you do a weekly testing of the chemicals and keep the water levels where they need to be for the filters to work correctly. This will make the pool safe to swim in and not cause any health problems to swimmers.
Diving in Vanuatu
Vanuatu is located in the South Pacific Ocean in close proximity to Fiji and the Solomon Islands. Archeological evidence of occupation dates back to 1300 BC. Its first inhabitants were the Melanesians and it remained so until the end of the 18th century when the Europeans arrived with Britain and France claiming the regions and thus renaming it ‘New Hebrides’ for constitutional purposes.
Diving in South Africa
In the past, South Africa was often overlooked as a scuba diving location. But the Republic of South Africa which has over 1, 700 mile or 2,798 kilometers of coastline fronting both the Atlantic and Indian Oceans. Considered by many be one the best outdoor adventure capital of the world, South Africa has become a prime international dive spot.
Diving In Papua New Guinea – One of the Best Scuba Diving Spots in the Pacific
Papua New Guinea, or called PNG by the local people, is a country of diversity and contrasts. Known officially as the Independent State of Papua New Guinea, this small country occupies the eastern half of the island of New Guinea, along with several hundred islands in the South Pacific, roughly north of Australia.
