This document explains topics relating to wireless ... The main topics ... include, what type of ... exist today in 802.11 networks and ways that you can help prevent these vul
This document explains topics relating to wireless networks. The main topics discussed include, what type of vulnerabilities exist today in 802.11 networks and ways that you can help prevent these vulnerabilities from happening. Wireless networks have not been around for many years. Federal Express has been using a type of wireless networks, common to the 802.11 networks used today, but the general public has recently just started to use wireless networking technology. Because of weak security that exists in wireless networks, companies such as Best Buy have decided to postpone the roll-out of wireless technology. The United States Government has done likewise and is suspending the use of wireless until a more universal, secure solution is available.
Background
What is Wireless?
Wireless LANs or Wi-Fi is a technology used to connect computers and devices together. Wireless LANs give persons more mobility and flexibility by allowing workers to stay connected to the Internet and to the network as they roam from one coverage area to another. This increases efficiency by allowing data to be entered and accessed on site.
Besides being very simple to install, WLANs are easy to understand and use. With few exceptions, everything to do with wired LANs applies to wireless LANs. They function like, and are commonly connected to, wired Ethernet networks.
The Wireless Ethernet Compatibility Alliance [WECA] is the industry organization that certifies 802.11 products that are deemed to meet a base standard of interoperability. The first family of products to be certified by WECA is that based on the 802.11b standard. This set of products is what we will be studying. Also more standards exist such as 802.11a and 802.11g.
The original 802.11 standard was published in 1999 and provides for data rates at up to 2 Mbps at 2.4 GHz, using either FHSS or DSSS. Since that time many task groups have been formed to create supplements and enhancements to the original 802.11 standard.
The 802.11b TG created a supplement to the original 802.11 standard, called 802.11b, which has become the industry standard for WLANs. It uses DSSS and provides data rates up to 11 Mbps at 2.4 Ghz. 802.11b will eventually be replaced by standards which have better QoS features, and better security.
Network Topology
There are two main topologies in wireless networks which can be configured:
Peer-to-peer (ad hoc mode) – This configuration is identical to its wired counterpart, except without the wires. Two or more devices can talk to each other without an AP.
Client/Server (infrastructure networking) – This configuration is identical to its wired counterpart, except without the wires. This is the most common wireless network used today, and what most of the concepts in this paper apply to.
Benefits of Wireless LANs
WLANs can be used to replace wired LANs, or as an extension of a wired infrastructure. It costs far less to deploy a wireless LAN than to deploy a wired one. A major cost of installing and modifying a wired network is the expense to run network and power cables, all in accordance with local building codes. Example of additional applications where the decision to deploy WLANs include:
Additions or moves of computers.
Installation of temporary networks
Installation of hard-to-wire locations
Wireless LANs give you more mobility and flexibility by allowing you to stay connected to the Internet and to the network as you roam.
Cons of Wireless LANs
Wireless LANs are a relatively new technology which has only been around since 1999. With any new technology, standards are always improving, but in the beginning are unreliable and insecure. Wired networks send traffic over a dedicated line that is physically private; WLANs send their traffic over shared space, airwaves. This introduces interference from other traffic and the need for additional security. Besides interference from other wireless LAN devices, the 2.4 GHz is also used by cordless phones and microwaves.
Security Issues of WLANs
War-driving
War-driving is a process in which an individual uses a wireless device such as a laptop or PDA to drive around looking for wireless networks. Some people do this as a hobby and map out different wireless networks which they find. Other people, who can be considered hackers, will look for wireless networks and then break into the networks. If a wireless is not secure, it can be fairly easy to break into the network and obtain confidential information. Even with security, hackers can break the security and hack. One of the most prevalent tools used on PDAs and Microsoft windows devices is, Network Stumbler, which can be downloaded at http://www.netstumbler.com. Equipped with the software and device, a person can map out wireless access points if a GPS unit is attached. Adding an antenna to the wireless card increases the capabilities of Wi-Fi. More information can be found at: http://www.wardriving.info and http://www.wardriving.com to name a few.
War-chalking
War-chalking is a method of marking wireless networks by using chalk most commonly. War-driving is usually the method used to search for networks, and then the person will mark the network with chalk that gives information about the network. Some of the information would include, what the network name is, whether the network has security, and possibly the contact information of who owns the network. If your wireless network is War-chalked and you don't realize it, your network can be used and/or broken into faster, because of information shown about your network.
Eavesdropping & Espionage
Because wireless communication is broadcast over radio waves, eavesdroppers who just listen over the airwaves can easily pick up unencrypted messages. These intruders put businesses at risk of exposing sensitive information to corporate espionage. Wireless LAN Security – What Hackers Know That You Don't www.airdefense.net Copyright 2002
Internal Vulnerabilities
Within an organization network security can be compromised by ways such as, Rouge WLANs (or Rouge Aps), Insecure Network Configuration, and Accidental Associations to name a few.
Rouge Access Points – An employee of an organization might hook up an access point without the permission or even knowledge of IT. This is simple to do, all a person has to do is plug an Access point or wireless router into an existing live LAN jack and they are on the network. One statistic in 2001 by Gartner said that, “at least 20 percent of enterprises already have rouge access points.” Another type of attack would be if, someone from outside the organization, enters into the workplace and adds an Access Point by means of Social Engineering.
Insecure Network Configurations- Many companies think that if they are using a firewall or a technology such as VPN, they are automatically secure. This is not necessarily true because all security holes, big and small, can be exploited. Also if devices and technologies, such as VPNs, firewalls or routers, are mis-configured, the network can be compromised.
Accidental Associations – This can happen if a wireless network is setup using the same SSID as your network and within range of your wireless device. You may accidentally associate with their network without your knowledge. Connecting to another wireless LAN can divulge passwords or sensitive document to anyone on the neighboring network. Wireless LAN Security – What Hackers Know That You Don't www.airdefense.net Copyright 2002
Social Engineering – Social Engineering is one of the most effective and scariest types of attacks that can be done. This type of attack really scares me and can be done for many other purposes besides compromising security in wireless networks. A scenario: Someone dressed up as a support person from Cisco enters the workplace. The secretary sees his fake credentials and lets him get pass the front desk. The impersonator walks from cubicle to cubicle, collecting user names and passwords as he/she goes. After finding a hidden corner, which seems to be lightly traveled, he plugs an insecure Access Point into the network. At the same time he configures the Access Point to not broadcast its SSID and modifies a few other settings to make it hard for the IT department to find this Rouge Access Point. He then leaves without ever being questioned by anyone because it looks like he just fits in. Now, all he has to do is be within 300 feet from the access point, (more if he added an antenna), and now has access to all kinds of secure documents and data. This can be a devastating blow to any corporation and could eventually lead to bankruptcy if the secrets of the company were revealed to competitors.
Bruce Schneier came to my classroom and said the following about Social Engineering, “Someone is just trying to do their job, and be nice. Someone takes advantage of that by targeting this human nature. Social Engineering is unsolvable.”
Securing Wireless Networks
According to Bruce Schneier and others such as Kevin Mitnick, you can never have a totally secure computing environment. What is often suggested is to try and control the damage which can be done if security is breached. One can try many different tools on the market which can help prevent security breaches.
WEP – WEP supports both 64 and 128-bit keys. Both are vulnerable, however, because the initialization vector is only 24-bits long in each case. Its RC4 algorithm, which is used securely in other implementations, such as SSL, is quite vulnerable in WEP. Http://www.infosecuritymag.com/2002/jan/cover.shtml Wireless Insecurities By Dale Gardner. Different tools exist to break WEP keys, including AirSnort, which can be found at www.airsnort.net. Although this method is not a secure solution, it can be used to help slowdown an attacker if other means are not possible financially or otherwise.
VPN and IPSec- IPSec VPNs let companies connect remote offices or wireless connections using the public Internet rather than expensive leased lines or a managed data service. Encryption and authentication systems protect the data as it crosses the public network, so companies don't have to sacrifice data privacy and integrity for lower costs. A lot of VPN's exist on the market today. An important note about VPNs is, interoperability does not really exist, and whatever you use for your server has to be the same brand as your clients most of the time. Some VPNs include:
Borderware
BroadConnex Networks
CheckPoint
Cisco
Computer Associates
DMZ – Adding this to your network enables you to put your wireless network on an untrusted segment of your network.
Firewalls – Firewalls are all over the place. Firewalls range from hardware to software versions. By adding a firewall between the wireless network and wired network helps prevent hackers from accessing your wired network. This paper doesn't go into specifics about different firewalls and how to set them up, but there are many. Some of the firewalls include:
- ZoneAlarm (an inexpensive based software firewall) Zonelabs.com
- Symantec has many different firewalls depending what you require.
PKI - Public-key infrastructure (PKI) is the combination of software, encryption technologies, and services that enables enterprises to protect the security of their communications and business transactions on the Internet. What is PKI? http://verisign.netscape.com/security/pki/understanding.html
Site Surveys – Site Surveys involve using a software package and a wireless device to probe your network for Access Points and security risks.
Proactive Approaches
Since wireless technology is insecure, companies or anyone can take a proactive approach to try and identify hackers trying to gain access via wireless networks.
Honeypots – are fake networks setup to try and lure in hackers. This enables administrators to find out more about what type of techniques hackers are using to gain access. One product is Mantrap created by Symantec.
“ManTrap has the unique ability to detect both host- and network-based attacks, providing hybrid detection in a single solution. No matter how an internal or external attacker tries to compromise the system, Symantec ManTrap's decoy sensors will deliver holistic detection and response and provide detailed information through its system of data collection modules.”
http://enterprisesecurity.symantec.com/products/products.cfm?ProductID=157
Intrusion Detection – Intrusion Detection is software that monitors traffic on the network. It sounds out a warning if a hacker it trying to access the network. One such free product is Snort.
“Before we proceed, there are a few basic concepts you should understand about Snort. There are three main modes in which Snort can be configured: sniffer, packet logger, and network intrusion detection system. Sniffer mode simply reads the packets off of the network and displays them for you in a continuous stream on the console. Packet logger mode logs the packets to the disk. Network intrusion detection mode is the most complex and configurable configuration, allowing Snort to analyze network traffic for matches against a user defined rule set and perform several actions based upon